您现在的位置:首页>>快速门动态 >> 「宁波快速门」硬质快速门窜限位的调试方法

「宁波快速门」硬质快速门窜限位的调试方法

作者:宁波快速门批发   发布时间: 2019/6/19 16:42:30

 

 

「宁波快速门」硬质快速门窜限位的调试方法


Adjustment Method of Channel Limitation for Rigid Rapid Gate of Ningbo Expressway
 



龙盛门业作为国内知名的快速门企业,为了更便捷的为用户服务,在全国各地建立办事处,为用户提供安装及维修工作。


龙盛门业宁波办事处为您提供快速门量尺,安装及售后服务


offices all over the country to provide installation and maintenance work for users in order to serve users more conveniently.


「宁波快速门」硬质快速门窜限位的调试方法


Adjustment Method of Channel Limitation for Rigid Rapid Gate of Ningbo Expressway


硬质快速门控制系统失灵,要及时查找原因进行修复,控制系统的重要性就好比,汽车的刹车器,若不及时修复,极有可能发生事故。


If the hard fast door control system fails, it is necessary to find out the cause in time for repair. The importance of the control system is similar to that of the brake of the automobile. If the brake of the automobile is not repaired in time, it is very likely that an accident will happen.

 

 

宁波快速门批发




1、车间硬质快速门的靠板螺丝发生了松动,这样就会导致靠板发生位移的现象,那么就需要用工具将滑块螺钉紧固,向着靠板的方向进行复位。


1. The slab screw of the hard fast door in the workshop has loosened, which will lead to the displacement of the slab. Then the slider screw needs to be tightened with tools and reset in the direction of the slab.


2、行程开关失效或者是出片变形,这样就会导致无法正常的控制快速门的升起或降落,因此就需要更换掉设备的微动开关或者是触片,基本上就可以解决了。


2. The failure of the stroke switch or the deformation of the disc will lead to the failure of normal control of the rise or fall of the fast door. Therefore, it is necessary to replace the micro-switch or contactor of the equipment, which can be basically solved.


3、继电器接触点出现了粘死的情况,这就会导门无法正常的启动,那么只需要更换新的继电器就可以了。


3. The contact point of relay sticks to death, which will make the guide door unable to start normally, so it only needs to replace the new relay.


之后在使用的时候,注意保养继电器设备,及时清理掉各个部件周边的污垢垃圾等。


After that, when using, pay attention to the maintenance of relay equipment, timely cleaning of dirt and garbage around each component.


4、快速门的滑块或者是螺母无法跟随者丝杆的转动而移动,那么这样就有可能会引起无法启动的问题,可以尝试加点润滑油的解决办法。


4. The slider or nut of the fast door can not follow the rotation of the screw rod and move, so it may cause the problem of not starting, you can try to add some lubricant solution.


5、限位器传动齿轮损坏,就会导致限位器无法正常进行工作,引起门设备的无法良好控制,因此需要更换掉限位器的传动齿轮。
 


6、控制系统中的开启关闭的上下键有可能被卡死了,那么只需要更换掉损坏了的按钮就可以了,在使用中多注意经常保养和维护,经常检修有损坏的零部件,及时更换。


6. The upper and lower keys of the opening and closing in the control system may be stuck, so only the damaged buttons need to be replaced. More attention should be paid to frequent maintenance and maintenance, frequent maintenance of damaged parts and components, and timely replacement.


用户们,以上就是关于硬质快速门限位失灵的解决办法了,龙盛门业感谢您的阅读,如需订购产品,欢迎与我们联系哦


Users, the above is the solution to the failure of hard fast threshold. Longshengmen appreciates your reading. If you need to order products, please contact us.

 

联系我们CONTACT US
版权所有:杭州龙盛门业有限公司
电话:13940183063(于经理)
网址:http://www.hzlsdoor.com
客服:406080090
查看更多
电话:13940183063于经理(媒体勿扰)    
版权所有:杭州龙盛门业有限公司
百度地图 - 网站地图 -